JVC GZ-MS120 User Manual

21
ENGLISH
RECORDING/
PLAYBACK
Still Image Recording
Preparation:
•
Open the LCD monitor to turn on the camcorder.
•
Insert an SD card.
Slide the mode switch to select
# (still image) mode.
Press PLAY/REC to select the
recording mode.
PLAY/REC
Press and hold SNAPSHOT
halfway.
The ? indicator becomes green when
the captured image is focused.
Press SNAPSHOT fully to take a
still image.
FINE
NOTE
•
DIS (Digital Image Stabilizer) does not function during still image recording.
•
If the camcorder is not operated for 5 minutes while the power is on, it turns itself off automatically to
conserve power. To turn on the camcorder again when using the battery pack, close the LCD monitor
and open it again. When using the AC adapter, perform any operation such as zooming.
L To view the last recorded image
Select A after shooting.
Selecting * during playback deletes
that image.
L To change the image quality
Change the settings in [IMAGE
QUALITY]. (Z p. 56)
L To record still images continuously
Set to [CONTINUOUS SHOOTING] in
[SHUTTER MODE]. (Z p. 55)
[9999]
FINE
GZ-MS120UC_GB_EN.indb 21 12/16/2008 10:08:49 AM

JVC GZ-MS120 Specifications

General

Filter size	30.5 mm
Digital zoom	800 x
Optical zoom	35 x
Image stabilizer	Yes
Focal length range	2.2 - 77 mm
Focal length (35mm film equivalent)	36 - 1260 mm
Sensor type	CCD
Total megapixels	0.8 MP
Optical sensor size	1/6 \
Display diagonal	2.7 \
Video out	AV
USB 2.0 ports quantity	1
Product color	Silver
Battery type	BN-VF808

Weight and Dimensions

Depth	112.5 mm
Width	54.5 mm
Height	65 mm
Weight	290 g