5
ENGLISH
Date/Time Setting
Open the LCD monitor to
turn on the camcorder
Q
Select [YES] within
10 seconds
R
Slide your finger up and down on the
sensor. Then touch OK.
(Z p. 9)
Select [CLOCK SETTING]
S
Set the date and time
V
SAVE
QUIT
CLOCK SETTING
GMT 0:00
DATE TIME
04 55 PM1
2009
NOV
LCD monitor
•
When the message disappears, press
the power button for at least 2 seconds
to turn off the power, and then press it
again for at least 2 seconds.
•
Touch the sensors with your finger. The
sensors do not function if you touch
them with your finger nail or with gloves
on.
QUIT
SET THE CITY, DATE AND TIME
@
CLOCK SETTING
AREA SETTING
SET FOR DAYLIGHT SAVING TIME
CLOCK ADJUST
Select the city closest to
the area where you use
the camcorder
T
AREA SETTING
SET
QUIT
GMT
:
JAN.1. 2009 01:00AM
Select [ON] or [OFF]
U
Select [ON] if daylight saving time is
effective.
SET
QUIT
SET DAYLIGHT SAVING TIME
JAN.1. 2009 01:00AM
SET FOR DAYLIGHT SAVING TIME
DAYLIGHT SAVING TIME (DST)
OFF
Touch sensor: Sets the date and time
➜: Moves the cursor to the right
OK: Clock starts
Power button ( )
GZ-MS120UC_GB_EN.indb 5 12/16/2008 10:08:34 AM
To Next Page
Loading...
