EasyManuals Logo

JVC GZ-MS120 User Manual

JVC GZ-MS120
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
60
Troubleshooting (Continued)
Trouble Action
Recording
Recording cannot be
performed.
SD card is full. Delete unnecessary files or replace the SD card.
Recording stops by
itself.
Insert a commercially available SD card, and set each of the
[VIDEO SLOT SELECTION] and [IMAGE SLOT SELECTION] to
[SLOT A] or [SLOT B].
Recording stops automatically after 12 hours of non-stop recording.
To ensure continuous recording, set [AUTO SWITCH REC MEDIA]
to [ON] before you start recording. (Z p. 56)
The recorded subject is
too dark.
Use backlight compensation.
Set [GAIN UP] to [AGC] or [AUTO].
Use [NIGHT] from scene select.
Set the brightness to the [+] side.
The recorded subject is
too bright.
Set the backlight compensation to off if it is being used.
Set the brightness to the [–] side.
Digital zoom does not
work.
Change [ZOOM] to [80X/DIGITAL] or [800X/DIGITAL].
Digital zoom is not available in the still image recording mode.
The focus is not
adjusted automatically.
Wipe the lens with lens cleaning cloth.
If you are recording in a dark place or a subject that has no
contrast between dark and light, adjust the focus manually.
The color looks strange.
(Too bluish, too reddish,
etc)
Set [WB] in [MANUAL SETTING] appropriately to the light source.
Select [MWB] in [WB] while holding a sheet of plain white paper in
front of the camcorder so that the white paper fills the screen. Keep
touching OK until the B indicator appears.
White balance setting
cannot be activated.
This cannot be used if [SEPIA] or [MONOTONE] are selected as
effects.
Do not use [TWILIGHT] from scene select.
The continuous
shooting speed is slow.
The continuous shooting speed will drop after continuous shots.
Continuous shooting speed may drop depending on the recording
media or under certain recording conditions.
Band of bright light
appears on the LCD
monitor.
This occurs when there is a bright light source near the camcorder.
This is not a malfunction. Change the direction of the camcorder to
prevent the light source comes into view.
GZ-MS120UC_GB_EN.indb 60 12/16/2008 10:09:25 AM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC GZ-MS120 and is the answer not in the manual?

JVC GZ-MS120 Specifications

General IconGeneral
Filter size30.5 mm
Digital zoom800 x
Optical zoom35 x
Image stabilizerYes
Focal length range2.2 - 77 mm
Focal length (35mm film equivalent)36 - 1260 mm
Sensor typeCCD
Total megapixels0.8 MP
Optical sensor size1/6 \
Display diagonal2.7 \
Video outAV
USB 2.0 ports quantity1
Product colorSilver
Battery typeBN-VF808
Weight and Dimensions IconWeight and Dimensions
Depth112.5 mm
Width54.5 mm
Height65 mm
Weight290 g

Related product manuals