JVC HR-A230EK - Regular Timer Programming

21
Regular Timer
Programming
Before performing the following steps, insert a cassette with the
safety tab in place. The recorder power will come on automati-
cally.
Remember, the clock must be set before you can progamme
the timer (
Z pg. 8).
q
6
12
45
3
6
8
0
7
9
1
3
2
START+/–
PROG.
2,3
1
DATE+/–
5
STOP+/–
4
: PDC
ACCESS TIMER PROGRAM-
MING DISPLAY
1
Press PROG.
ACCESS PROGRAMME
DISPLAY
2
Press START +/–.
● If you're not receiving PDC (Programme Delivery
Control), press NUMBER key "7" to set to "OFF" so
that the indicator disappears (Z pg. 23).
ENTER PROGRAMME
START TIME
3
Press START +/– to enter the time you want recording
to start.
● Press and hold START +/– to move in 30-minute
increments, or press and release repeatedly to move 1
minute at a time.
ENTER PROGRAMME STOP
TIME
4
Press STOP +/– to enter the time you want recording to
stop.
ENTER PROGRAMME DATE
5
Press DATE +/–. (The current date appears on the front
display panel. The date you enter appears in its place.)
SP
SP
Start time
≠
Stop time
≠
CONTINUED ON NEXT PAGE.