NUMBER
q
6
STORE
Storing Channels Manually
Store channels that were not stored during Auto Channel Set.
ACCESS CH. SET DISPLAY
1
Press and hold CH SET for more than 2 seconds.
"AUTO" appears on the front display panel.
ACCESS CONFIRMATION
DISPLAY
2
Press PUSH JOG
%
fi to select “MANU”(AL), then press
OK. The Confirmation display appears.
SELECT POSITION
3
Press PUSH JOG
%
fi is until an open position in which
you want to store a channel is displayed, then press
OK. The Manual Ch. Set display appears.
INPUT CHANNEL
4
The channel number "21" appears blinking.
Press the NUMBER keys to input the channel number
you want to store.
● For fine tuning adjustment, press PUSH JOG
until the channel number blinks, then press PUSH
JOG
%
fi. While tuning, “
–
”, "–" or “
–
” appears.
ENTER NEW CHANNEL
INFORMATION
5
Press OK or STORE, and the Confirmation display
appears.
● Repeat steps 3 through 5 as necessary.
RETURN TO NORMAL
DISPLAY
6
Press CH SET.
● To input the station name, see page 28.
● To change positions, see "Change Station Preset
Position" (Z pg. 27).
Preset Position
≠
Channel
≠
PUSH JOG
fi
%
To Next Page
Loading...
