37
REAR VIEW
1 and 2 Symbolic Mode Indicators
3 Start Time/Stop Time Indicator separates Start Time
and Stop Time of timer recording on Display Panel.
Z pg. 19
4 "DAILY" Program Mark lights when recorder has been
programmed to record daily serial.
Z pg. 20
5 PDC Indicator lights when PDC has been engaged
for timer recording.
Z pg. 23
6 "WEEKLY" Program Mark lights when recorder has
been programmed to record weekly serial.
Z pg. 20
PLAY: REVERSE PLAY:
FF:
STILL:
FORWARD SLOW:
REW:
STILL:
REVERSE SLOW:
FF VARIABLE
RECORD:
SHUTTLE SEARCH:
REW VARIABLE
RECORD PAUSE:
SHUTTLE SEARCH:
7 "Cassette Loaded" Mark lights once a cassette is
inserted; remains lit until cassette ejected or power
turned off.
8 Instant Timer Recording Indicator lights when ITR
initiated; remains lit until ITR finishes.
Z pg. 16
9 Tape Speed Indicators display mode of recording or
playback; light when recorder turns on.
Z pg. 15
0 "Timer" Indicator lights when TIMER has been
pressed to engage Timer mode.
Z pg. 20
! Counter shows time elapsed since playback or
recording began.
Clock Display shows current time.
Z pg. 8
* Counter and Clock Display appear alternately when
DISPLAY is pressed.
@ Channel Display shows station name being received
and its preset position.
Mode shows external input mode selected.
DISPLAY PANEL
SP
LP
EP
M
D
D
I T R
W
708 ! @
1
23
54
9
6
5RF OUT Switch enables operation via RF connection
or AV connection; activates test pattern when tuning
TV receiver for video preset.
Z pg. 5
6 RF OUT Connector enables connection to aerial
terminal of TV receiver.
Z pg. 4
7 RF Output Channel Adjustment Screw enables
adjustment of output channel if UHF channel 36 is
used in your area.
Z pg. 5
1 Mains Power Cord supplies power to recorder.
Z pg. 4
2 AV1 IN/OUT SCART Connector enables AV connec-
tion to TV or second recorder; input recordable when
"AU 1" selected.
Z pg. 4
3 AV2 IN Connector enables connection of satellite
receiver or second recorder; input recordable when
"AU 2" selected.
Z pg. 6
4 ANT. IN Connector enables connection of aerial.
Z pg. 4
AV2 IN
RF OUT
32
40
ANT. IN
AV1 IN/OUT
RF OUT
ON–TEST–OFF
12
4
5
6
7
3
To Next Page
Loading...
