JVC HR-A230EK - Fine-Tuning Channels Already Stored

29
12
45
3
6
8
0
7
9
1
3
2
OK
q
6
Perform steps 1 and 2 on page 26 to access the Confirmation
display before continuing.
Fine-Tuning Channels
Already Stored
SELECT CHANNEL TO
FINE-TUNE
1
Press PUSH JOG%
fi
until the channel you want to tune
is displayed.
ACCESS MANUAL CH. SET
DISPLAY
2
Press OK three times. The Manual Ch. Set display
appears.
PERFORM TUNING
3
Press PUSH JOG
%
fi
until the picture is its clearest.
Then press OK.
● The Confirmation display appears.
● Repeat steps 1 through 3 as necessary.
RETURN TO NORMAL
DISPLAY
4
Press CH SET.
CH SET
PUSH JOG