JVC HR-A51U - VCR Clock Setup; Clock Setup Preparation; Accessing Clock Settings Menu

EN 11
Clock
Perform clock setting only if the clock has not been set correctly
by the Plug & Play function. Access the Clock Set screen to
perform the Semi-Auto or Manual clock setting procedure. Each
procedure starts from step 5.
If you use a cable box, set the clock manually. (墌 pg. 13)
Preparation
TURN ON THE VCR
1
Press POWER.
ACCESS MAIN MENU
SCREEN
2
Press MENU.
ACCESS INITIAL SET
SCREEN
3
At the Main Menu screen,
move the highlight bar
(arrow) to “INITIAL SET”
by pressing CH
5
∞ or
SHUTTLE PLUS
%
fi, then
press OK or SHUTTLE
PLUS .
ACCESS CLOCK SET
SCREEN
4
Move the highlight bar
(arrow) at the Initial Set
screen to “CLOCK SET” by
pressing CH
5
∞
or
SHUTTLE PLUS
%
fi
, then
press OK or SHUTTLE
PLUS .
%
MAIN MENU
FUNCTION SET
TUNER SET
= INITIAL SET
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
CH
OK
MENU
POWER
12 3
45
0
6
7 8 9
1
2
4
3
–
+
POWER
SHUTTLE PLUS
MENU
OK
INITIAL SET
=CLOCK SET
LANGUAGE ENGLISH
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
%
HR-A51U-EN01-17 99.6.17, 11:31 AM11