JVC HR-XVS44U - VCR On-Screen Display; VCR Display Indicators

Filename [XVS44U_06Index.fm]
Masterpage:Left+
12 EN
Page 12 25 August 2003 10:46 am
INDEX (cont.)
ON-SCREEN DISPLAY (VCR deck)
If you press
DISPLAY
on the Remote when “SUPERIMPOSE” is set to “ON” (
墌
pg. 77), various operational indicators
appear on the TV screen.
For On-screen display for DVD deck, refer to “Using the on-screen bar” (
墌
pg. 48).
A
Operation Mode Indicators
B
Tape Speed (SP/EP)
C
Tape Position Indicator
The tape position indicator
appears on the TV screen
when you press
REW
(
3
)
or
FF
(
5
) from the Stop
mode or perform an Index
Search. (
墌
pg. 30) The
position of “
q
” in relation to
“0” (beginning) or “+” (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape being used, the tape position
indicator may not appear correctly.
D
Index number
墌
pg. 30
E
Tape Remaining Time Indicator
墌
pg. 34
F
Counter Display
G
Audio Mode Display
墌
pg. 31
H
SAP Indicator
墌
pg. 34
I
Stereo Program Indicator
墌
pg. 34
J
Day/Clock Display
K
Channel Position Number/Auxiliary Input
Indicator (F-1 or L-1)
L
“Cassette Loaded” Mark
Beginning End
To recall an indication
A
Press
DISPLAY
.
●
All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE if in the Record Pause
mode, remain on the screen.
B
Press
DISPLAY
again to clear the display.
●
The RECORD/PAUSE indication remains on the screen.
XVS44U_01.book Page 12 Monday, August 25, 2003 11:08 AM