JVC HR-XVS44U User Manual

Masterpage:Right-No-Heading
EN 47
Filename [XVS44U_08DVD.fm]
Page 47 25 August 2003 11:01 am
VFP function
— Adjusting the picture quality
The VFP (Video Fine Processor) function enables you to adjust
the picture character according to the type of programing,
picture tone or personal preference.
NOTE:
Before you start operation;
The VFP setting screen disappears if no operations are done for
more than about 10 seconds. If the setting screen disappears
before you finish, start from step
1
again.
1
Access the VFP setting menu.
2
Select the VFP mode.
Press
we
repeatedly.
●
Each time you press
we
, the VFP mode changes as follows:
NORMAL
]
CINEMA
]
USER 1
]
USER 2
]
(Back to the
beginning)
NOTE:
You cannot adjust the parameters of “NORMAL” and “CINEMA”.
To adjust picture appearance manually
3
Access USER menu.
4
Select the parameter.
Press
rt
repeatedly to select a parameter you want to
adjust, then press
OK
.
●
Adjust gradually and confirm picture appearance results are as
preferred.
●
VFP menu disappears and the following pop-up window
appears on the TV screen.
5
Adjust the parameter.
Press
rt
repeatedly to change the setting, then press
OK
.
●
The current VFP settings appear again.
6
Adjust the other parameters.
Repeat steps
4
and
5
to adjust other parameters.
To return to the normal screen
Press
DVD PICTURE
.
To activate your setting
Press
DVD PICTURE
, then press
we
repeatedly to select
“USER 1” or “USER 2” that you have changed the
parameters.
Press
DVD PICTURE
during
playback.
●
The current setting appears on
the TV screen.
NORMAL
: Select this normally.
CINEMA
: Suitable for movie.
USER 1
/
USER 2
:
You can adjust parameters that affect picture
appearance and store settings. Go to step
3
.
Press
we
repeatedly to
select “USER 1” or “USER 2”.
+
0
NORMAL
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
Y DELAY
+
0
+
0
+
0
+
0
+
3
+
0
+
0
USER 1
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
Y DELAY
+
0
+
0
+
0
+
0
+
3
+
0
GAMMA
(–4 to +4):
Controls brightness of neutral tints while
maintaining brightness of dark and bright
portions.
BRIGHTNESS
(–16 to +16):
Controls screen brightness.
CONTRAST
(–16 to +16):
Controls screen contrast.
SATURATION
(–16 to +16):
Controls screen color depth.
TINT
(–16 to +16):
Controls screen tint.
SHARPNESS
(+0 to +3):
Controls screen sharpness.
Y DELAY
(–2 to +2):
Controls screen color gap.
+
0
GAMMA
+
0
GAMMA
XVS44U_01.book Page 47 Monday, August 25, 2003 11:08 AM

JVC HR-XVS44U Specifications

General

Brand	JVC
Model	HR-XVS44U
Category	DVD VCR Combo
Language	English