!
Burrs formed during molding may be left over on some parts of the chassis. Therefore,
pay attention to such burrs in the case of preforming repair of this system.
Safety precaution
!
Please use enough caution not to see the beam directly or touch it in case of an
adjustment or operation check.
Difference point
Remote controller
Telephone Muting
Line Out Level / Impedance
KD-AR470 KD-G420, KD-G524, KD-G525
4.0V / 20k load
KD-AR470, KD-G420, KD-G524 and KD-G525
Steering wheel remote input
KD-G521 KD-G527
KD-G521, KD-G527
2.5V / 20k load
YES
YES
NO
NO
YES NO
To Next Page
Loading...
Need help?
General
