26
ENGLISH
General settings — PSM
Basic procedure
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
2
Select a PSM category.
You can move to a different category by
simply changing the PSM items.
3 Select a PSM item.
4 Adjust the PSM item selected.
5 Repeat steps 2 to 4 to adjust the
other PSM items if necessary.
6 Exit from the setting.
Indications Selectable settings, [reference page]
MOVIE
Demo
Display demonstration
All Time: [Initial]; Display demonstration (animation) appears.
ImageLink: To show a still image while playing back an MP3/
WMA track, [12, 14, 43].
Interval: Display demonstration (animation) and playback
source indication appears alternately.
Off: Cancels.
• These graphics appear if no operation is done for about
20 seconds.
Graphics
Graphics
You can activate the graphic screen using either movie or picture,
[25].
UserMovie: Your edited animation stored in “MOVIE” is
activated.
UserSlide: Your edited still images stored in “PICTURE” are
activated and shown in sequence.
UserPict.: [Initial]; One of your edited still images stored in
“PICTURE” is activated.
KeyIn CFM
Key-in confirmation
On: [Initial]; An animation screen appears when you turn on or off
the power, change the source, and when you select an i-EQ.
Off: Cancels.
To Next Page
Loading...
