17
ENGLISH
What you can do with RDS
RDS (Radio Data System) allows FM
stations to send an additional signal along
with their regular programme signals.
By receiving the RDS data, this receiver can
do the following:
•
Programme Type (PTY) Search (see page 16)
• Temporarily switches to Traffic
Announcement—TA Standby Reception.
(See
the right column
.)
•
Temporarily switches to your favorite
programme—PTY Standby Reception. (See
pages 18 and 45.)
•
Tracing the same programme automatically
—Network-Tracking Reception
(See
page 18
.)
• Programme Search (See page 45.)
Storing your favorite programmes
You can store six favorite programme types.
1
2 Select “PTY Memory”.
3 Select a preset number (Preset1–6)
you want to store the programme
into.
4 Select a PTY code you want to store.
The selected preset number and PTY code
flash for a while.
5 Finish the procedure.
Using the standby receptions
TA Standby Reception
TA Standby Reception allows the receiver to
switch temporarily to Traffic Announcement
(TA) from any source other than AM.
• The volume changes to the preset TA volume
level (see page 45).
• If the DAB tuner is connected, Standby
Reception also works to search for a DAB
service.
To activate TA Standby Reception
either lights up or
flashes.
T/P
OK
DISP
D
OK
T/P
To be continued....
To Next Page
Loading...
Need help?
General
