JVC KD-AVX77 - System Settings and Sensor Configuration; Beep Tones and Telephone Muting; Monitor;Sensor and Initialization Settings

Telephone Muting *17 • Off
• Mutingl,
~
..
QI
.c
o
Beep
Monitor/Sensor
• Off
.On
Normal/Prox.
NormallT ouch
WallPaper/
Prox.
WallPaper/
Touch
Off/Prox.
OfflTouch
Buttons and information light up
when your hand moves closer to
the touch panel.
Buttons and information light up
when you touch the touch panel.
Buttons and information light up when your hand moves
closer to the touch panel.
Buttons and information light up when you touch the touch
panel.
The touch panel lights up when your hand moves closer to it.
The touch panel lights up when you touch it.
Motion Sensitiv.
(Sensitivity)
Initialize
Change the sensitivity of the sensor for <Monitor/Sensor> (above).
• Mid, High
Initialize all settings you have made in AV Menu. Hold [Enter] to initialize the
settings, then reset the unit. ((;.l3)
*17 The TEL MUTING lead connection is required. See Installation/Connection Manual.
20