JVC KD-BT1 - Selecting Preset Sound Modes; General Settings: PSM

ENGLISH
33SETTINGS
Continued on the next page
Selecting a preset sound mode
: To display the rest
You can select a preset sound mode suitable to the music genre.
• When appears on the display, you can move back to the previous display by pressing number button 3.
~ Enter setting menu.
Ÿ Select “EQ.”
! Select a sound mode.
FLAT (no sound mode is applied), H.ROCK (Hard Rock), R & B (Rhythm & Blues), POP, JAZZ, DANCE, COUNTRY,
REGGAE, CLASSIC, USER 1, USER 2, USER 3
⁄ Exit from the setting.
The list below shows the preset value setting for each sound mode:
Sound modes
Preset values
Low Mid High
Level FREQ Q Level FREQ Q Level FREQ Q
FLAT 00 60 Hz Q1.25 00 1 kHz Q1.25 00 10 kHz
Fix
H.ROCK +03 100 Hz Q1.0 00 1 kHz Q1.25 +02 10 kHz
R & B +03 80 Hz Q1.25 +01 1 kHz Q1.25 +03 15 kHz
POP +02 100 Hz Q1.25 +01 1 kHz Q1.25 +02 10 kHz
JAZZ +03 80 Hz Q1.25 00 1 kHz Q1.25 +03 10 kHz
DANCE +04 60 Hz Q1.0 –02 1 kHz Q1.0 +01 10 kHz
COUNTRY +02 60 Hz Q1.0 00 1 kHz Q1.0 +02 12.5kHz
REGGAE +03 60 Hz Q1.25 +02 1 kHz Q1.25 +02 12.5kHz
CLASSIC +01 80 Hz Q1.25 00 1 kHz Q1.25 +03 10 kHz
FREQ: Frequency; Q: Band width
EN24-33_KD-BT1_003A_f.indd 33EN24-33_KD-BT1_003A_f.indd 33 2/12/07 10:34:01 AM2/12/07 10:34:01 AM