ENGLISH
39SETTINGS
2
3 Select a source.
All Source *
1
Ô CD Ô Changer (or Ext In *
2
)
Ô USB *
3
Ô FM Ô AM Ô DAB *
3
Ô
iPod *
3
/D.PLAYER *
3
Ô BT Phone Ô
BT Audio Ô (back to the beginning)
*
1
When you select “All Source,” you can use the
same color for all the sources.
*
2
Depends on the “Ext Input” setting, see page 38.
*
3
Displayed only when the target component is
connected.
4 Select a color.
Every *
4
Ô Aqua Ô Sky Ô Sea Ô Leaves
Ô Grass Ô Apple Ô Rose Ô Amber Ô
Honey Ô Violet Ô Grape Ô Pale Ô
User *
5
Ô (back to the beginning)
*
4
The color changes every 2 seconds.
*
5
The user-edited colors—“Day Color” and
“NightColor” will be applied (see page 40 for
details).
5 Repeat steps 3 and 4 to select the color
for each source (except when selecting
“All Source” in step 3).
6 Exit from the setting.
Continued on the next page
Setting the time for dimmer
• When appears on the display, you can move
back to the previous display by pressing number
button 3.
1 Follow steps 1 to 3 on page 35.
• In step 2, select “DISPLAY.”
• In step 3, select “Dimmer.”
2 Select “Time Set.”
3 Adjust the dimmer time.
1 Turn the control dial to set the dimmer time.
2 Press ¢ to select “To.” Then, turn the
control dial to set the dimmer end time.
4 Exit from the setting.
Changing the display color
You can select your favorite display color for each source
(or all sources).
• When appears on the display, you can move
back to the previous display by pressing number
button 3.
Setting the display color
1 Follow steps 1 to 3 on page 35.
• In step 2, select “COLOR.”
• In step 3, select “Color Sel.”
EN34-43_KD-BT1_003A_f.indd 39EN34-43_KD-BT1_003A_f.indd 39 3/2/07 10:27:15 AM3/2/07 10:27:15 AM