JVC KD-DB912BT

24
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Start listening
While in Alexa idle state...
1 Press on the unit to activate Alexa.
The display shows: “LISTENING...”.
2 Communicate with Alexa via the connected microphone. (Page15)
3 During music playback in ALEXA source, you can perform the
following operations:
To On the faceplate
Play back/pause Press the volume knob.
Reverse skip/ Forward skip
Press S / T.
During music playback, press
to pause the music and activate Alexa. You
can now start to communicate with Alexa.
AMAZON ALEXA Audio Settings
1 Press and hold .
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press
.
Default: [XX]
[EQSETTING]
[PRESET EQ]
Selects a preset equalizer suitable to the music genre.
• Select [USER] to use the settings made in [EASYEQ] or [PROEQ].
[FLAT]/[DRVN 3]/[DRVN 2]/[DRVN 1]/[HARD ROCK]/[HIP HOP]/[JAZZ]/
[POP]/[R&B]/[USER]/[CLASSICAL]
Drive equalizer ([DRVN 3]/[DRVN 2]/[DRVN 1]) boosts specific frequencies
in the audio signal to reduce the noise heard from outside the car or running
noise of the tyres.
• When the display demonstration is activated ([ON] is selected initially,
page 5), [HARDROCK] is automatically selected as the [PRESET EQ].
– If you set [DEMO MODE] to [OFF] (page 5), [FLAT] is selected as the
default setting for [PRESET EQ].
JS_JVC_KD_DB912BT_E_EN_1.indd 24JS_JVC_KD_DB912BT_E_EN_1.indd 24 7/23/2019 4:59:32 PM7/23/2019 4:59:32 PM