16
ENGLISH
Prohibiting disc ejection
You can prohibit disc ejection and can lock a disc
in the loading slot.
While pressing CD/CD-CH, press and
hold for more than 2 seconds.
“NO EJECT” flashes on the display for about
5 seconds, and the disc is locked and cannot be
ejected.
To cancel the prohibition and unlock the
disc
While pressing CD/CD-CH, press and hold
again for more than 2 seconds.
“EJECT OK” flashes on the display for about
5 seconds, and the disc is unlocked.
Playing a CD Text
In a CD Text, some information about the disc (its
disc title, performer, and track title) is recorded.
This CD Text information will be shown
automatically when you play a CD Text.
To change the CD Text information
manually, select text display mode while
playing a CD Text.
Press DISP (display) repeatedly.
Each time you press the button,
the display changes as follows:
Notes:
• The display shows up to 12 characters at one time
and scrolls if there are more than 12 characters.
See also “To select the scroll mode—SCROLL
MODE” on page 29.
Some characters or symbols will not be shown (will
be blanked or substituted) on the display.
• If no name is assigned to the CD, “NO NAME” will
appear. To assign a name to an audio CD, see page
31.
• If no disc title/performer or no track title is recorded
for the CD Text, “NO NAME” will appear.
• When track title is shown, TRACK indicator and
current track number also appear on the lower part
of the display.
Disc title / performer
Track title
( lights up on the display)
Elapsed playing time and
Current track number
EN13-16_KD-G805[U]f.p65 20/11/03, 7:32 PM16
To Next Page
Loading...
Need help?
General
