18
ENGLISH
Refer also to “CD OPERATIONS” on pages
13 to 16.
Playing a disc
1
Open the control panel.
Note on One-Touch Operation:
When a disc is already in the loading slot,
pressing CD/CD-CH turns on the unit and starts
playback automatically.
2
Insert a disc into the loading slot.
The unit draws the
disc, the control panel
goes back to the
previous position (see
page 32), and playback
starts automatically.
All files will be played repeatedly until you
stop playback.
MP3/WMA OPERATIONS
The display changes to show the following:
*
1
When “CLOCK DISP” is set to “CLK DISP ON”
(see page 28), the current indication will soon
change to the clock time.
*
2
WMA or MP3 indicator lights up depending on the
first detected file.
Notes:
• MP3/WMA discs require a longer readout time.
(It differs due to the complexity of the folder/file
configuration.)
• When playback starts, folder and file names (or ID3
tags) will automatically appear. (See also page 19.)
• If you change the source or turn the power off, disc
playback stops (without ejecting the disc).
Next time you select the CD player as the source or
turn the power on, disc play starts from where
playback has been stopped previously.
Ex.: When the disc contains 19 folders
and 144 MP3/WMA files
Total file
number
Total folder
number
CD indicator
Current source
indication*
1
MP3 or WMA indicator*
2
EN18-22_KD-G805[U]f.p65 20/11/03, 7:31 PM18
To Next Page
Loading...
Need help?
General
