10
ENGLISH
Track and folder information (CD/CD Text/
MP3/WMA/USB)
Once you insert a disc or attach a USB
memory, the total track number/total
playing time (for CD/CD Text) and total
folder number/total track number (for MP3/
WMA/USB) appears, then the following
information appears...
Ex.: When “CD-CH” is selected as the source
• For the audio CD or CD Text:
Disc name*
4
and Track name*
5
• For the MP3/WMA/USB:
Folder name and File name, or
Album/performer*
6
and Track name*
6
• When playing CD changer, the total
numbers will not appear.
*
1
Displayed only when an MP3/WMA
track is played back.
*
2
Displayed only when “CD-CH” is selected
as the source.
*
3
Either MP3 or WMA indicator lights up
depending on the detected file.
*
4
Appears only for CD Texts and CDs if
it has been recorded or assigned. (“No
Name” appears if no name is recorded or
assigned.)
*
5
Appears only for CD Texts. (“No Name”
appears if no name is recorded.)
*
6
Appears only when “Tag” is set to “On”
(see page 18).
Playing a USB memory
This unit can play MP3/WMA tracks stored in a
USB memory.
All tracks in the USB memory will be played
repeatedly until you change the source.
• Removing the USB memory will also stop
playback.
~
Ÿ
If a USB memory has been attached...
Playback starts from where it has been stopped
previously.
• If a different USB memory is currently
attached, playback starts from the beginning.
To detach the USB memory, straightly pull it
out from the unit.
Cautions:
• Avoid using the USB memory if it might
hinder your safety driving.
• Make sure all the important data has been
backed up to avoid losing the data.
USB input terminal
USB memory
File type*
1
*
3
Current disc number*
2
Current folder number*
1
Current track number
Elapsed playing time
EN06-13KD-G825[U_UH]f.indd 10EN06-13KD-G825[U_UH]f.indd 10 12/23/05 11:18:06 AM12/23/05 11:18:06 AM
To Next Page
Loading...
Need help?
General
