JVC KD-LH810 - External Component Operations; Playing External Components

37
ENGLISH
External component operations
Playing an external component
For KD-LH810:
• If “EXT-IN” does not appear, see
page 31.
Ÿ Turn on the connected component
and start playing the source.
! Adjust the volume.
⁄ Adjust the sound as you want.
(See pages 19 – 22.)
For KD-AR860:
You can connect an external component to the
LINE IN plugs on the rear.
For KD-AR860/KD-LH810:
You can connect an external component to the
CD changer jack on the rear using the Line
Input Adapter KS-U57 (not supplied).
Before operating the external component, select
the external input correctly (see page 31).
• For connection, see Installation/Connection
Manual (separate volume).
~ For KD-AR860:
LINE-IN: For selecting the external
component connected to the
LINE IN plugs.
EXT-IN: For selecting the external
component connected to the
CD changer jack.
EN32-37_KD-AR860[J]f.indd 37EN32-37_KD-AR860[J]f.indd 37 12/17/04 5:42:46 PM12/17/04 5:42:46 PM