JVC KD-LX1 - Assigning Names to the Sources

27
ENGLISH
Sources Maximum number of the characters
Station frequencies Up to 10 characters (up to 30 station
frequencies including both FM and AM)
CDs* Up to 32 characters (up to 40 discs)
Assigning names to the sources
You can assign names to station frequencies and CDs. After assigning a name, it will appear
on the display when you select the source.
To be continued on the next page
1
Select a source you want to assign a name to.
2 Press and hold SEL (Select) for more than 2
seconds while pressing DISP.
3 Select the character you want while “_” is flashing.
Each time you press the button, the character changes.
About the available characters, see page 28.
4
23
6
When you select a station frequency
as the source:
When you select the CD as the
source:
C
* You cannot assign a name to a CD Text.
EN20-28.KD-LX1[J]/F 99.2.10, 3:32 PM27