JVC KD-R300 User Manual

Symptoms Remedies/Causes
• The CO charlgerdoesnotworkatall. Reset the unit (see page 3).
Reconnect this unit and the HD Radio tuner box correctly,
then reset the unit.
Fix the reception mode either to "DIGITAL" or "ANALOG"
(see pages 14 and 24).
• "ANALOG" is selected when receiving all digital
broadcast of HD Radio station. Select "DIGITAL" or
"AUTO" (see pages 14 and 24).
• "DIGITAL" is selected when receiving weak digital
signals or receiving conventional radio broadcast.
Select "ANALOG" or "AUTO" (see pages 14
and 24).
Check whether the connected audio device supports
AVRCP (Audio Video Remote Control Profile).
• Reduce the distance between the unit and the
Bluetooth audio device.
• Disconnect the device connected for "BT -PHONE."
• Turn off, then turn on the unit.
• (When the sound is not yet restored,) connect the
device again.
• PRESET 8"appears Qnthe display. Connect this unit and the CD changer correctly and press
the reset button ofthe CD changer.
• "RESET 1" - "RESET 7" appears on the Press the reset button of the CD changer.
display.
• "NO MAGAZINE" appears ()n the-display., Insert the magazine.
• "NO DISC" appears on the display. Insert a disc into the magazine.
• No sound can b~heaJd.
• Sound quality changes, when receiving
HO Radio stations.
• The connected audio device cannot be
controlled.
ThesQund .. is interrupted orSkipped.durin
g
,playbackof a· Blu~toothaudiodevi(e.
32

JVC KD-R300 Specifications

General

Brand	JVC
Model	KD-R300
Category	Car Receiver
Language	English