JVC KD-R481 - GETTING STARTED: Initial Setup and Configuration; Set Clock and Date; Set Basic System Settings

ENGLISH
4
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
GETTING STARTED
Cancel the demonstration
When you turn on the power (or after you reset the unit), the display
shows: “CANCEL DEMO”
“PRESS ENTER”
1 Press .
[YES] is selected for the initial setup.
2 Press again.
“DEMO OFF” appears.
Set the clock and date
1
Press and hold .
2 Press to select [CLOCK] , then press .
To adjust the clock
3 Press to select [CLOCK ADJUST] , then press .
4 Press to make the settings, then press .
Hour
Minute
5 Press to select [CLOCK FORMAT] , then press .
6 Press to select [12H] or [24H] , then press .
To set the date
7 Press to select [DATE SET] , then press .
8 Press to make the settings, then press .
Day
Month Year
9 Press to exit.
To return to the previous setting item, press .
1
2
Set the basic settings
1
Press and hold .
2 Press to select an item (see the following table), then press
.
3 Repeat step 2 until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press
.
Default:
XX
SYSTEM
KEY BEEP
ON :Activates the keypress tone.; OFF :Deactivates.
SOURCE SELECT
AM SRC
*
ON :Enables AM in source selection.; OFF :Disables. ( 5)
SW1 SRC
*
ON :Enables SW1 in source selection.; OFF :Disables. ( 5)
SW2 SRC
*
ON :Enables SW2 in source selection.; OFF :Disables. ( 5)
PANDORA SRC
*
(For KD-R681 )
ON :Enables PANDORA in source selection.; OFF :Disables. ( 9)
IHEART SRC
*
(For KD-R681 )
ON :Enables IHEARTRADIO in source selection.; OFF :Disables. ( 10)
BUILT-IN AUX
*
ON :Enables AUX in source selection.; OFF :Disables. ( 11)
*
Not displayed when the corresponding source is selected.
3
JS_JVC_KD_R681_M_EN_4.indd 4JS_JVC_KD_R681_M_EN_4.indd 4 8/1/2016 10:22:43 AM8/1/2016 10:22:43 AM