To Next PageTo Next PageWhy does 'READING' keep flashing on my JVC Car Receiver?
If “READING” keeps flashing on your JVC Car Receiver: * Do not use too many hierarchical levels and folders. * Reload the disc or reattach the USB device.
What does 'NO SKIPS' mean on my JVC KD-R486?
If “NO SKIPS” appears on your JVC Car Receiver, the skip limit has been reached.
Why can't I playback in [AUTO MODE] on my JVC KD-R486 Car Receiver?
If you cannot playback in [AUTO MODE] on your JVC Car Receiver: * Make sure the JVC MUSIC PLAY APP is installed on your Android device. * Reconnect the Android device and select the appropriate control mode. * If the problem persists, the connected Android device may not support [AUTO MODE].
What does 'CONNECT ERR' mean on my JVC KD-R486 Car Receiver?
If “CONNECT ERR” appears on your JVC Car Receiver, it indicates that communication is unstable.
What does 'STATION LMT' mean on my JVC Car Receiver?
If “STATION LMT” appears on your JVC Car Receiver, the number of registered stations has reached its limit. Retry after deleting unnecessary stations from your device.
What does 'SAVE ERROR' mean on my JVC KD-R486?
If “SAVE ERROR” appears on your JVC Car Receiver, addition to the favorite category failed.
What does 'NOT CONNCTD' mean on my JVC Car Receiver?
If “NOT CONNCTD” appears on your JVC Car Receiver, link to the application is impossible.
What does 'UPGRADE APP' mean on my JVC Car Receiver?
If “UPGRADE APP” appears on your JVC Car Receiver, make sure you have installed the latest version of the Pandora application on your device.
What does 'UPDATE APP' mean on my JVC Car Receiver?
If “UPDATE APP” appears on your JVC Car Receiver, make sure you have installed the latest version of the iHeart Link for JVC application on your device.
How to eject a disc from JVC KD-R486 Car Receiver if it's stuck?
If a disc cannot be ejected from your JVC Car Receiver, press and hold the eject button to forcibly eject the disc. Be careful not to drop the disc when it is ejected.
General| Brand | JVC |
|---|---|
| Model | KD-R486 |
| Type | Car Receiver |
| Maximum Output Power | 50W x 4 |
| RMS Power | 22W x 4 |
| USB | Yes |
| AUX Input | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| FLAC Playback | No |
| AAC Playback | Yes |
| AM/FM Radio | Yes |
| RDS | Yes |
| Display Type | LCD |
| Display Color | White |
| Button Illumination | Red |
| Steering Wheel Control Ready | Yes |
| Bluetooth | No |
| Detachable Face | Yes |
| iPod Control | Yes |
| iPhone Control | Yes |
| Pre-Output Voltage | 2.5V |
| Frequency Response | 20Hz - 20kHz |
| Signal-to-Noise Ratio | 80dB |
| Remote Control | Optional |
| Pre-Output Impedance | 10k ohms |
Steps to cancel demonstration, set clock/date, and configure basic system settings.
Detailed configuration of preset, easy, and pro equalizers for sound tuning.
Adjusting volume, amplifier gain, and configuring speaker output configurations.
Troubleshooting steps for common issues across different sources like Radio, iPod, and Android.
Specific solutions for errors encountered with Pandora and iHeartRadio applications.
Critical safety warnings and step-by-step guides for unit installation.
Detailed guide for connecting the unit's wiring harness to the vehicle's electrical system.
