To Next PageTo Next PageWhat to do if sound cannot be heard during playback on JVC Car Receiver?
If you cannot hear sound during playback on your JVC Car Receiver, try the following: 1. Reconnect the Android device. 2. If in [AUDIO MODE], launch any media player application on the Android device and start playback. 3. If in [AUDIO MODE], relaunch the current media player application or use another media player application. 4. Restart the Android device.
How to eject a disc from JVC KD-R486 Car Receiver if it's stuck?
If a disc cannot be ejected from your JVC Car Receiver, press and hold the eject button to forcibly eject the disc. Be careful not to drop the disc when it is ejected.
What does 'UPDATE APP' mean on my JVC Car Receiver?
If “UPDATE APP” appears on your JVC Car Receiver, make sure you have installed the latest version of the iHeart Link for JVC application on your device.
What does 'UPGRADE APP' mean on my JVC Car Receiver?
If “UPGRADE APP” appears on your JVC Car Receiver, make sure you have installed the latest version of the Pandora application on your device.
Why is the radio reception poor on my JVC KD-R486 Car Receiver?
If you are experiencing poor radio reception with your JVC Car Receiver, make sure the antenna is firmly connected.
How to fix 'MISWIRING CHECK' error on JVC KD-R486?
If the message “MISWIRING CHECK” appears on your JVC Car Receiver, turn the power off. Check to ensure the terminals of the speaker wires are insulated properly, and then turn the power back on.
What to do if iPod/iPhone doesn't work with JVC Car Receiver?
If your iPod/iPhone does not turn on or work with the JVC Car Receiver: * Check the connection between the unit and your iPod/iPhone. * Detach and reset the iPod/iPhone using a hard reset.
What does 'PLEASE EJECT' mean on my JVC Car Receiver?
If the message “PLEASE EJECT” appears on your JVC Car Receiver, press the eject button, then insert the disc correctly.
Why can't I playback in [AUTO MODE] on my JVC KD-R486 Car Receiver?
If you cannot playback in [AUTO MODE] on your JVC Car Receiver: * Make sure the JVC MUSIC PLAY APP is installed on your Android device. * Reconnect the Android device and select the appropriate control mode. * If the problem persists, the connected Android device may not support [AUTO MODE].
How to fix JVC KD-R486 when no sound can be heard?
If you cannot hear any sound from your JVC Car Receiver, first, ensure that the volume is at an audible level. If the sound is still not audible, check all cords and connections to make sure they are properly connected.
General| Brand | JVC |
|---|---|
| Model | KD-R486 |
| Type | Car Receiver |
| Maximum Output Power | 50W x 4 |
| RMS Power | 22W x 4 |
| USB | Yes |
| AUX Input | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| FLAC Playback | No |
| AAC Playback | Yes |
| AM/FM Radio | Yes |
| RDS | Yes |
| Display Type | LCD |
| Display Color | White |
| Button Illumination | Red |
| Steering Wheel Control Ready | Yes |
| Bluetooth | No |
| Detachable Face | Yes |
| iPod Control | Yes |
| iPhone Control | Yes |
| Pre-Output Voltage | 2.5V |
| Frequency Response | 20Hz - 20kHz |
| Signal-to-Noise Ratio | 80dB |
| Remote Control | Optional |
| Pre-Output Impedance | 10k ohms |
Steps to cancel demonstration, set clock/date, and configure basic system settings.
Detailed configuration of preset, easy, and pro equalizers for sound tuning.
Adjusting volume, amplifier gain, and configuring speaker output configurations.
Troubleshooting steps for common issues across different sources like Radio, iPod, and Android.
Specific solutions for errors encountered with Pandora and iHeartRadio applications.
Critical safety warnings and step-by-step guides for unit installation.
Detailed guide for connecting the unit's wiring harness to the vehicle's electrical system.
