JVC KD-R507 - Basic Operations and Controls; Power, Source, and Dial Functions; Panel Features and Navigation

ENGLISH
4
Basic operations
q Select the display and button illumination color.
w • Turn on the power.
• Attenuate the sound (if the power is on).
• Turn off the power [Hold].
e Remote sensor
• You can control this unit with an optionally
purchased remote controller. For details, see
page 12.
r AUX (auxiliary) input jack
*
1
Also known as “Control dial” in this manual.
*
2
You cannot select “CD” as the playback source if no
disc is in the unit.
*
3
You cannot select these sources if they were disabled
in the Menu (see “SRC SELECT” in “Menu
operations” on page 18).
1 • FM/AM/FM-LO: Select preset station.
• CD: Select folder.
2 Select the source.
FM = CD *
2
= AUX IN *
3
= AM *
3
= FM-LO
= (back to the beginning)
3 • Enter list operations.
• Enter Menu setting [Hold] .
4 • Control the volume or select items [Turn].
• Confirm the selection [Press] .
• FM/FM-LO: Enter SSM preset mode [Hold] .
• CD: Enter playback mode [Hold] .
5 Display window
6 • Activate/deactivate TA Standby Reception.
• Enter PTY Searching mode [Hold].
7 Change the display information.
8 Flip down the control panel.
• To eject the disc, flip down the control panel
then press 0 on the unit.
9 • FM/AM/FM-LO: Search for station.
• CD: Select track.
p Return to the previous menu.
EN02-09_KD-R507[EE]_2.indd 4EN02-09_KD-R507[EE]_2.indd 4 11/11/08 4:30:51 PM11/11/08 4:30:51 PM