JVC KD-R820BT

18 ENGLISH
You can connect an Apple iPod/iPhone using the USB 2.0 cable (accessory of the iPod/iPhone) to
the USB input terminal on the control panel or USB cable from the rear of the unit.
~
] Turns on the power.
Ÿ
Playback starts automatically.
USB cable from the
rear of the unit
Selecting a track from the menu
Not applicable under < iPod Mode/
Application Mode
>.
1
2
] Select the desired menu.
Playlists j Artists j Albums j
Songs
j Podcasts j Genres j
Composers
j Audiobooks j (back to
the beginning)
3
] Select the desired track.
Repeat this step until the desired track
is selected.
• If the selected menu contains many tracks,
you can fast search (±10, ±100, ±1 000)
through the menu by turning the control dial
quickly.
• To return to the previous menu, press BACK.
USB 2.0 cable (accessory of the iPod/iPhone)
USB input terminal
Apple iPod/iPhone
Listening to an iPod/iPhone
[Hold]
and/or
Cautions:
• Avoid using the iPod/iPhone if it might hinder
your safety driving.
• Make sure all important data has been backed
up to avoid losing the data.
Selecting the control terminal
] <Headunit Mode/ iPod Mode/
Application Mode>
• For details, refer to <iPod Switch> setting on
page 29.
Basic operations
Applicable under <Headunit Mode/
iPod Mode>.
For <Application Mode>, applicable only for
some audio applications.
[Press] Selects track/
chapter.
[Hold] Fast-forwards or
reverses the track.
Using the remote controller
2 / 3 : [Press] Selects track/chapter.
[Hold] Fast-forwards or reverses the
track.
EN02-35_KD-R820BT[J]2.indd 18 1/7/11 4:39:51 PM