JVC KD-R820BT

25ENGLISH
You can select a preset sound mode suitable
for the music genre.
FLAT = NATURAL = DYNAMIC = VOCAL
= BASS = USER = (back to the beginning)
While listening, you can adjust the subwoofer
level and tone level of the selected sound
mode.
1
2
] Select a setting item (Sub. W/ Bass/
Middle/ Treble).
3
] Adjust the level:
Sub. W : 00 to 08
Bass/ Middle/ Treble : –6 to +6
The sound mode is automatically stored
and changed to “USER.”
[Hold]
Selecting a preset sound mode
Storing your own sound mode
You can store your own adjustments in
memory.
1
2
] <PRO EQ> ] <Bass/ Middle/ Treble>
3
Adjust the sound elements of the
selected tone. (See table below.)
1 Press 4 / ¢ to adjust the
frequency.
2 Turn the control dial to adjust the
level.
3 Press 5 / ∞ to adjust the Q-slope.
4 Press the control dial to store the
adjustment.
4
Repeat steps 2 and 3 to adjust other
tones.
5
] Exit from the menu.
The adjustments made will be stored
and changed to “USER.”
Bass [ Initial: 50 Hz, 0, Q1.0 ]
Frequency: 50 Hz, 100 Hz, 200 Hz
Level: –6 to +6
Q: Q0.7, Q1.0, Q1.4, Q2.0
Middle [
Initial: 1 kHz, 0, Q1.0 ]
Frequency: 500 Hz, 1 kHz, 2 kHz
Level: –6 to +6
Q: Q0.7, Q1.0, Q1.4, Q2.0
Treble [
Initial: 10 kHz, 0, Q1.0 ]
Frequency: 5 kHz, 10 kHz, 15 kHz
Level: –6 to +6
Q: Q0.7, Q1.0, Q1.4, Q2.0
[Hold]
EN02-35_KD-R820BT[J]2.indd 25 1/7/11 4:40:57 PM