JVC KD-R820BT

22 ENGLISH
Changing HD Radio reception
mode
While receiving an HD Radio broadcast, you
can change the reception mode — digital or
analog.
• This setting cannot take effect for the
conventional FM/AM stations.
While listening to an HD Radio station...
1
2
] <Tuner> ] <Blend Hold> ]
<Auto / Digital / Analog>
<Auto>: Switches between digital and
analog audio automatically.
• In the case when the radio station
forces the reception mode to digital
or analog,
or indicator
lights up.
<Analog / Digital>: Tuning to digital
audio or analog audio only.
•
indicator lights up when holding
the digital reception; flashes when
holding the analog reception.
The setting automatically return to <Auto>
when you tune in to another broadcast or if
you turn off the power.
Changing the display information
Frequency Text *
*
“No Text” appears when no text
is received.
Using the remote controller
5 / ∞ : [Press] Changes the preset stations/
channels.
[Hold] Searches for HD Radio stations
only.
2 / 3 : [Press] Searches for stations
automatically.
[Hold] Searches for stations manually.
[Hold]
Listening to the satellite radio
Before operating, connect either one of the following systems (not supplied) to the expansion port
on the rear of this unit.
For listening to a SIRIUS Satellite radio:
• SCC1 and KS-SRA100
• D&P, SCVDOC1 and KS-SRA100
For listening to an XM Satellite radio:
• JVC Smart Digital Adapter (XMDJVC100)
• CNP2000UCA and CNPJVC1
For details, refer also to the instructions supplied with the other components.
~
] “SIRIUS” or “XM”
!
] Select a channel to listen.
Holding the button changes the channels
rapidly.
While searching, invalid and unsubscribed
channels are skipped.
XM: If you do not select a channel within
15 seconds, category selected in step
Ÿ is
canceled. You can select all channels of all
categories now (including non-categorised
channels).
Ÿ
] Select a category.
SIRIUS: If you select “ALL,” you can tune
in to all the channels of all categories.
EN02-35_KD-R820BT[J]2.indd 22 1/7/11 12:36:52 PM