27ENGLISH
Continued...
Menu item
Selectable setting, [
Initial: Underlined
]
Color Setup
Day Color Button Zone
You can create your own day and night colors for <Button Zone> and
<Display Zone> separately.
Press
5
/
∞
to select a primary color [
Red
/
Green
/
Blue
], then
turn the control dial to adjust the level [
00
—
31
]. Repeat this
procedure until you have adjusted all the three primary colors. Then,
press the control dial to confirm.
• If “
00
” is selected for all the primary colors for <Display Zone>,
nothing appear on the display.
Display Zone
Night
Color
Button Zone
Display Zone
Menu Color
On
: Changes the display and buttons (except for
DISP
/
EQ
/
0
) illumination during
menu, list search and playback mode operations. /
Off
: Cancels.
Dimmer
Dimmer Set Auto
:
Changes the display and button illumination between the Day/Night
adjustments in <Brightness>/<Color Setup> setting when you turn off/on the car
headlights
*
3
. /
Time Set
:
Sets the start/end timer for dimmer. Turn the control dial
to adjust the start time, then press the control dial to confirm. Repeat this step to enter
the end time. /
On
:
Selects the Night adjustments in <Brightness>/<Color Setup>
setting for the display and button illumination. /
Off
:
Selects the Day adjustments in
<Brightness>/<Color Setup> setting for the display and button illumination.
Brightness Day
[
31
] /
Night
[
15
] : Customizes the display and button illumination brightness
level [
00
—
31
] for day and night.
Display
Scroll *
4,
*
5
Once
: Scrolls the displayed information once. /
Auto
: Repeats scrolling (at 5-second
intervals). /
Off
: Cancels.
(Pressing
DISP
for more than one second can scroll the display regardless of the setting.)
Tag Display On
: Shows the Tag information while playing MP3/WMA/WAV tracks. /
Off
: Cancels.
LCD Type Negative
: Negative pattern of the display. /
Positive
: Positive pattern of the display. /
Auto
: Positive pattern will be selected during the day time
*
6
; while negative pattern will
be used during the night time
*
6
.
Contrast Level
01
—
Level
08
[
Level 05
] : Adjust the display contrast to make the display
indications clear and legible.
PRO EQ
For settings, see page 25.
*
3
The illumination control lead connection is required. (See “Installation/Connection Manual.”) This setting
may not work correctly on some vehicles (particularly on those having a control dial for dimming). In this case,
change the setting to any other than <Dimmer Auto>.
*
4
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*
5
Not applicable to HD Radio text scrolling.
*
6
Depends on the <Dimmer Set> setting.
EN02-35_KD-R820BT[J]3.indd 27 1/12/11 4:52:25 PM
To Next Page
Loading...
