JVC KD-R864BT

ENGLISH
17
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
KD-R864BT / KD-R862BT / KD-R861BTKD-R961BT
1 Press and hold .
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press .
Default: XX
DISPLAY
DIMMER
Selects the display and button illumination adjusted in the [ BRIGHTNESS ]
setting.
OFF :Selects the day adjustments.; ON :Selects the night adjustments.;
DIMMER TIME :Adjusts the dimmer on and off time.
Turn the volume knob to adjust the [
ON ] time, then press the knob.
Turn the volume knob to adjust the [
OFF ] time, then press the knob.
(Default: [
ON ]: 18:00 or 6:00 PM
[
OFF ]: 6:00 or 6:00 AM)
AUTO :Changes between the day and night adjustments when you turn off or
on the car headlights. *
1
For KD-R961BT , the display and button colors change according to the
settings made on [
COLOR ].
DISPLAY SETTINGS
BRIGHTNESS Sets the button, display and USB input terminal brightness for day and
night separately.
1 DAY / NIGHT :Select day or night.
2 Select a zone for setting. ( Illustration on left)
3 Set the brightness level ( 00 to 31 ).
(Default:
KD-R961BT : DAY : 31 ; NIGHT : 11
KD-R864BT / KD-R862BT / KD-R861BT :
BUTTONZONE : DAY : 25 ; NIGHT : 09
DISPZONE : DAY : 31 ; NIGHT : 12 )
SCROLL *
2
ONCE :Scrolls the display information once.; AUTO :Repeats scrolling at
5-second intervals.;
OFF :Cancels.
COLOR (for KD-R961BT )
PRESET You can select a color for [ ALLZONE ], [ ZONE1 ], [ DISPZONE ], or [ ZONE2 ]
separately. For [
ALL ZONE ], you can also select a color pattern.
Default color:
ALLZONE : [ COLOR06 ], ZONE 1 : [ COLOR06 ],
DISPZONE : [ COLOR01 ], ZONE 2 : [ COLOR27 ]
1 Select a zone for setting. ( Illustration on left)
2 Select a color for the selected zone.
•
COLOR01 to COLOR29
• USER : The color you have created for [ DAYCOLOR ] or
[
NIGHTCOLOR ] is shown.
•
COLORFLOW01 to COLORFLOW03 : Color changes at different
speeds.
•
GROOVE / TECHNO / EMOTION / RELAX / SPECTRUM / SWEEP /
POP : The selected color pattern is shown.*
3
(Selectable only when
[
ALLZONE ] is selected in step  1 .)
*
1
The illumination control wire connection is required. ( 25)
*
2
Some characters or symbols will not be shown correctly (or will be blanked).
*
3
If one of these color pattern is selected, the [ ZONE1 ], [ DISPZONE ], [ ZONE2 ] illumination
color will change to the default color.
JS_JVC_KD_R961BT_E_EN_20_1.indd 17JS_JVC_KD_R961BT_E_EN_20_1.indd 17 20/10/2014 11:09:31 AM20/10/2014 11:09:31 AM