What does “PLEASE WAIT” mean on my JVC KD-RD98BTS?
If “PLEASE WAIT” appears on your JVC Car Receiver, the unit is preparing to use the Bluetooth function. If the message does not disappear, turn off and turn on the unit, then connect the device again.
What does “ERROR” mean on my JVC KD-RD98BTS?
If “ERROR” appears on your JVC Car Receiver, try the operation again. If “ERROR” appears again, check if the device supports the function you have tried.
What does “H/W ERROR” mean on my JVC KD-RD98BTS?
If “H/W ERROR” appears on your JVC Car Receiver, reset the unit and try the operation again. If “H/W ERROR” appears again, consult your nearest service center.
What to do if “CODE ERROR” appears on JVC Car Receiver?
If your JVC Car Receiver displays “CODE ERROR”, make sure you have entered the correct pass code.
Why is the sound interrupted or skipped during Bluetooth playback on my JVC Car Receiver?
If the sound is being interrupted or skipped during playback of a Bluetooth audio player on your JVC Car Receiver, reduce the distance between the unit and the Bluetooth audio player. You can also try turning the unit off and on again, then attempt to reconnect. Be aware that other Bluetooth devices might be trying to connect to the unit.
Why can't I hear sound on my JVC KD-RD98BTS?
If you cannot hear sound from your JVC Car Receiver, adjust the volume to the optimum level and check the cords and connections.
How to improve radio reception on JVC KD-RD98BTS Car Receiver?
To improve poor radio reception on your JVC Car Receiver, connect the antenna firmly.
Why is no Bluetooth device detected by my JVC KD-RD98BTS?
If no Bluetooth device is detected by your JVC Car Receiver, search from the Bluetooth device again or reset the unit.
Why pairing cannot be made with JVC KD-RD98BTS Car Receiver?
If pairing cannot be made with your JVC Car Receiver, ensure you have entered the same PIN code to both the unit and Bluetooth device. You can also delete pairing information from both the unit and the Bluetooth device, then perform pairing again.
What to do if “MISWIRING CHECK WIRING THEN PWR ON” appears on JVC KD-RD98BTS Car Receiver?
If the message “MISWIRING CHECK WIRING THEN PWR ON” appears on your JVC Car Receiver, turn the power off. Check to ensure the terminals of the speaker wires are properly insulated, then turn the power back on.
General cautions, FCC/IC compliance, and radiation exposure notices.
Key warnings and cautions for safe and proper product use.
Identifies and explains buttons and indicators on the unit's faceplate.
Steps for cancelling demo mode, setting clock, and basic settings.
Instructions for finding and selecting radio stations.
How to begin playback from different media sources.
Instructions for connecting and listening to Pandora music.
Steps to connect and listen to iHeartRadio.
Connecting the tuner and activating the SiriusXM subscription.
Selecting categories and channels for satellite radio listening.
Steps to pair a phone or audio device via Bluetooth.
Automatic pairing and managing incoming/ongoing calls.
Playing audio from a connected Bluetooth device.
Making calls from history, phonebook, or by dialing.
Selecting preset EQs or creating custom sound profiles.
Setting speaker delay times for optimal sound staging.
Solutions for sound issues, wiring errors, and poor radio reception.
Addressing playback errors and device compatibility issues.
Step-by-step guide for installing the unit in a vehicle.
Detailed wiring instructions for specific models.
Detailed wiring instructions for specific models.
Technical details for tuner, CD, USB, and auxiliary functions.
Technical details for Bluetooth connectivity and profiles.
Power output, impedance, and preout level specifications.
General| Brand | JVC |
|---|---|
| Model | KD-RD98BTS |
| Category | Car Receiver |
| Language | English |
To Next Page
