JVC KD-S890

15
ENGLISH
Playing a CD Text
In a CD Text, some information about the disc (its
disc title, performer, and track title) is recorded.
This CD Text information will be shown
automatically when you play a CD Text.
To change the CD Text information
manually, select text display mode while
playing a CD Text.
Each time you press the
button, the display changes
as follows:
Notes:
• The display shows up to 8 characters at a time and
scrolls if there are more than 8 characters.
See also “To select the scroll mode—SCROLL” on
page 24.
Some characters or symbols will not be shown (and
will be blanked) on the display.
(Ex. “ABCå!d#” ]“ABCA D ”)
• When you press DISP (display) while playing a
conventional CD, “NO NAME” appears for the disc
title/performer and the track title.
Prohibiting disc ejection
You can prohibit the disc ejection and can lock a
disc in the loading slot.
While pressing CD, press and hold 0 for
more than 2 seconds.
“EJECT” flashes on the display for about 5 seconds,
and the disc is locked and cannot be ejected.
To cancel the prohibition and unlock the disc
While pressing CD, press and hold 0 again for
more than 2 seconds.
“EJECT” and the CD–in indicator flash on the
display, and the disc ejects from the loading slot.
The CD–in indicator flashes.
Disc Title / performer
Track title
( lights up on the display)
Elapsed playing time and
Current track number
Clock and
Current track number
EN12-15_KD-S890[J]f.p65 1/3/03, 10:21 PM15