35
ENGLISH
○○○○○○○○○
Assigning titles to the sources
You can assign titles to 30 station frequencies,
40 CDs (both in this unit and in the CD
changer), and the external component.
Source Maximum number
Station frequencies: 16 characters
CDs: 32 characters
External component: 16 characters
• You cannot assign a title to CD Text, MP3,
and WMA discs.
• For available characters, see page 47.
1
Prepare the source.
• For FM/AM station frequencies:
Change “FM” or “AM,” then select a
station frequency.
• For a CD in this unit: Insert a CD.
• For CDs in the CD changer: Select
“CD-CH,” then select a disc number.
2
After playback starts...
The Main Menu appears on
the display.
3
Move the cursor to “TITLE” on the
Main Menu.
4
Enter the TITLE Menu.
Ex. When you have selected “CD” and assign
a title to the loaded disc
Other Main Functions
5
Assign a title.
1) Select a character set.
2) Enter a character.
3) Move to the next character position.
4) Repeat steps 1) to 3) until you finish
entering the title.
To erase the characters...
The entire title (all entered
characters) are erased at a
time.
6
After the title entry is finished...
• To cancel the title entry without
registration, press MENU.
BACK
DISP
MENU
OK
BAND
OK
BAND
BACK
DISP
Hold
Cursor
35-36_KD-SHX705[U]f.p65 4/1/04, 3:31 PM35
To Next Page
Loading...
Need help?
General
