21
ENGLISH
EXTERNAL COMPONENT OPERATIONS
Playing an external component
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. See “Selecting the external component”
on page 15.
1
Select the external component
(LINE IN).
• If “LINE IN”* does not appear on the
display, see page 15 and select the
external input (“LINE IN”).
* Displayed only when one of the following
sources is selected—FM, AM, and CD.
Note on One-Touch Operation:
When you press CD (CD-CH), the power
automatically comes on. You do not have to press
to turn on the power.
2
Turn on the connected component
and start playing the source.
3
Adjust the volume.
4
Adjust the sound characteristics
you want. (See pages 13 and 14.)
CD
LINE IN
EN21-21_KD-SX60WT_50M[J]f.p65 3/26/03, 4:07 PM21
To Next Page
Loading...
Need help?
General
