JVC KD-SX998R - Page 7

KD-SX998R,KD-SX997R
(No.49819)1-7
2.1.8 Removing the CD mechanism assembly
(See Fig. 11)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly, heat sink, bottom
cover, rear bracket, main board and CD mecha board.
(1) Remove the three screws K.
Fig.11
2.1.9 Removing the front board
(See Figs. 12 to 14)
• Prior to performing the following procedure, remove the front
panel assembly.
(1) Remove the four screws L on the back side of the front
panel assembly.
(2) Release the nine joints g.
(3) Take out the front board.
Fig.12
Fig.13
Fig.14
K
K
CD mechanism assembly
Top chassis
L
L
L
Front panel assembly
Joint g
Joint g
Joint g
Joint g
Rear cover
Front board