JVC KD-V100 Service Manual

JVC
SERVICE MANUAL
move. KD-V100.0/8/c/E/ED/J/U/NA/NB
NC/NE/NED/NJ/NU
Specifications
Type : Stereo cassette deck
Track system : 4-track, 2-channel
Tape speed : 1-7/8 inch/sec (4.8 cm/sec)
Frequency response:
Note: *1...
ey ae
*S Sav:
S/N ratio
Wow and flutter
Crosstalk
(0 dB recording)
Metal tape *1;
40—11,000 Hz (+ 3 dB)
Chrome tape *2;
40—8,000 Hz (+ 3 dB)
Normal tape *3;
40—8,000 Hz (+ 3 dB)
(—20 dB recording)
Metal tape *1;
40—15,000 Hz (+ 3 dB)
Chrome tape *2;
40—15,000 Hz (+ 3 dB)
Normal tape *3;
40—14,000 Hz (+ 3 dB)
JVC ME or Equivalent
TDK SA or Equivalent
MAXELL UD or Equivalent
: 58dB (S=1kHz, K3 = 3%,
N = A-Weight, Metal tape)
The S/N is improved by 5 dB at 1 kHz
and by 10dB above 5kHz with ANRS/
DOLBY B NR on.
: 0.08 % (WRMS),
0.20 % (DIN 45 500)
: 60 dB (1 kHz)
This service manual has been compiled based on
the KD-V11A/B/C/E/E(D)/J/U (No. 4216).
For repairing such sections as;
Controls and Connections,
Main Parts Location,
Removal of the Main Parts,
Main Adjustments,
refer to the KD-V11A/B/C/E/E(D)/J/U (No.
4216) because the repair procedure is the same.
Harmonic distortion: K3; 0.5 %, THD; 1.0 %
Heads
Motor
Fast forward time
Rewind time
Input terminals
Mic jack x 2
Input jack x 2
Output terminals
(metal tape, 1 kHz O dB)
: METAPERM head for recording/play-
back,
2-gap ferrite head for erasure
: Electronic governed DC motor
: 100 sec. with C-60 cassette
: 100 sec. with C-60 cassette
: Max. sensitivity; 0.4mV (—68 dBV)
Matching impedance; 600 Q — 10 kQ
: Min. input level; 80 mV
Input impedance; 100 kQ
Output jack x 2 : Output level; 300 mV
Output impedance; 5 kQ.
Power requirement : AC 240 V, 50/60 Hz (KD-V100A/B/NA/NB)
AC 120 V, 60 Hz (KD-V 100C/J/NC/NJ)
AC 220 V, 50/60 Hz
(KD-V100E/E(D)/NE/NED)
AC 240/220/110 V, 50/60 Hz
(KD-V100U/NU)
Power consumption: With power on; 10 W
Weight
With power switch off; 0.8 W
: 7.7 Ibs (3.5 kg)
Design and specifications are subject to change without notic
No. 4226
November 1983

JVC KD-V100 Specifications

General

Track System	4-track, 2-channel stereo
Total Harmonic Distortion	0.8%
Brand	JVC
Model	KD-V100
Motor	DC servo motor
Tape Type	CrO2, Metal
Frequency Response	30 Hz - 16 kHz (Metal tape)

Summary

Specifications

Performance Specifications

Details key audio performance metrics like distortion, frequency response, and signal-to-noise ratio.

Technical Specifications

Outlines device components, power, and input/output characteristics.

Safety Precautions

General Safety Precautions

Provides guidelines on product design integrity, component replacement, and wiring.

Leakage Current Check

Describes procedures to ensure electrical safety by checking for current leakage.

Wiring Connections

Standard Schematic Diagram

Amp. P.C.B. Parts List

Location of P.C. Board Parts

Exploded View of Enclosure Assembly

Parts List of Enclosure Assembly

Exploded View of Mechanism Assembly

Parts List of Mechanism Assembly

Dimension

Accessories

Packing