EasyManua.ls Logo

JVC KD-X250BT - Clock and Display Settings; Tuner and Sound Settings

JVC KD-X250BT
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Menu item
Selectable setting (Initial: [XX])
AUDIO
BEEP
(Keytouch tone)
[ON]/OFF: Activates or deactivates the keypress tone.
AMP GAIN
(Amplifier gain)
LOW POWER: Limits the maximum volume level to 30. (Select if the
maximum input power of each speaker is less than 50 W to prevent
damaging the speakers.)
[HIGH POWER]: The maximum volume level is 50.
CLOCK
CLOCK SET
For settings, ' page 4.
CLOCK ADJ
(Clock
adjustment)
[AUTO]: The built-in clock is synchronized with the Clock Time (CT) data
received from the FM Radio Broadcast Data System station.
OFF: Cancels.
CLOCK DISP
(Clock display)
ON/[OFF]: Activates or deactivates clock display when the unit is turned
off.
DIMMER
DIMMER SET Selects the display and button illumination adjusted in the <BRIGHTNESS>
setting.
[AUTO]: Changes between the Day and Night adjustments when you turn
off/on the car headlights. *5
ON: Selects the Night adjustments.
OFF: Selects the Day adjustments.
BRIGHTNESS DAY[31]/NIGHT[15]: Brightness settings for the display and button
illumination for day and night.
BUTTON ZONE/DISP ZONE: Sets the brightness levels 00 — 31.
DISPLAY
SCROLL *6 [ONCE]: Scrolls the display information once.
AUTO: Repeats scrolling (at 5-second intervals).
OFF: Cancels.
TAG DISPLAY [ON]: Shows the TAG information while playing MP3/WMA tracks.
OFF: Cancels.
TUNER
SSM
For settings, ' page 6. (Displayed only when the source is FM.)
AREA
(Frequency
tuning interval)
[AREA US]: For North/Central/South America, AM/FM intervals: 10kHz/200kHz.
AREA EU: For any other areas, AM/FM intervals: 9kHz/50kHz.
AREA SA: For some South American countries, AM/FM intervals: 10kHz/50kHz.
MONO
(Monaural mode)
Displayed only when the source is FM.
[OFF]: Enables stereo FM reception.
ON: Improves the FM reception but stereo effect will be lost.
IF BAND
(Intermediate
frequency band)
[AUTO]: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
WIDE: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
RADIO TIMER
For settings, ' page 7.
*5
The illumination control wire connection is required. (' page 31)
*6 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
Menu operations
ENGLISHޓ|
21
2012/11/22ޓ10:10:26KD-X250BT_J_EN

Table of Contents

Related product manuals