EasyManua.ls Logo

JVC KD-X250BT - Bluetooth and Source Management

JVC KD-X250BT
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Menu item
Selectable setting (Initial: [XX])
IPOD SWITCH
(iPod/iPhone control)
[HEAD MODE]/IPOD MODE/EXT MODE:
For settings, ' page 9. (Displayed only when the source is USB-IPOD.)
BLUETOOTH
PHONE *7 CONNECT/DISCONNECT: Connects or disconnects the Bluetooth phone/
audio device. (' page 13)
AUDIO
APPLICATION CONNECT/DISCONNECT: Connects or disconnects the JVC Smart Music
Control *8 in the smart phone.
DELETE PAIR
For settings, ' page 13.
P. BOOK WAIT Copies up to 400 numbers from the phonebook memory of a connected
phone to the unit via OPP.
SET PINCODE Changes the PIN code (1 to 6-digits). (Default PIN code: 0000)
Turn the volume knob to select a number, press / to move to the entry
position. After entering the PIN code, press the volume knob to confirm.
AUTO CNNCT [ON]: Establishes connection automatically with the Bluetooth device when
the unit is turned on.
OFF: Cancels.
INITIALIZE YES: Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.).
[NO]: Cancels.
INFORMATION PH CNNT DEV/AU CNNT DEV/APP CNT DEV *9: Displays connected
phone/audio/application device name.
MY BT NAME: Displays the unit name (JVC UNIT).
MY ADDRESS: Displays the address of this unit.
BT VERSION: Displays the Bluetooth version of this unit.
SRC SELECT
AM *10 [ON]/OFF: Enables or disables AM in source selection.
PANDORA *10 [ON]/OFF: Enables or disables PANDORA in source selection.
AUX *10 [ON]/OFF: Enables or disables AUX in source selection.
*7 <CONNECT> will not be displayed if two Bluetooth phones are connected at the same time.
*8 JVC Smart Music Control is designed to view JVC car receiver status and perform simple
control operations on Android smart phones.
For JVC Smart Music Control operations, visit JVC website:
<http://www3.jvckenwood.com/english/car/index.html> (English website only).
*9 Displayed only when a Bluetooth phone/audio player/application is connected.
*10 Displayed only when the unit is in any source other than the corresponding source “AM/
PANDORA/AUX”.
Menu operations
22
|ޓENGLISH
2012/11/22ޓ10:10:26KD-X250BT_J_EN

Table of Contents

Related product manuals