JVC KW-AV51 - Using other external components; Front AUX

33
AV-IN name* ( ☞ below)
*
Source type (“AV-IN” or
“Front AUX”)
1 Connect an external component.
3.5 mm stereo mini plug
(not supplied)
2 Select “ FrontAUX ” as the source.
(☞ page 12)
3 Turn on the connected component and
start playing the source.
Using other external components
• When the operation buttons are not displayed on the screen, touch the area shown on
the illustration.
• To change settings for video playback, ☞ page 40.
[Mode]* Changes the AV-IN name.
• Press [2] or [3] to select an AV-IN name.
[HOME] Displays the <HOME> screen.
* Appears when “
AV-IN ” is selected as the source.
You can connect external components to the LINE IN/
VIDEO IN jacks. (☞ Installation/Connection Manual)
Preparation:
Select [AV-IN] for <AV Input>. (☞ page 44 )
• <AV Input> can be changed only when <Input>
in <Navigation Input> is set to [RGB] or [Off].
1 Select “ AV-IN ” as the source. (☞ page 12)
2 Turn on the connected component and
start playing the source.
AV-IN Front AUX
EN_KW-AV61UI.indb 33EN_KW-AV61UI.indb 33 12/11/09 11:5212/11/09 11:52