JVC KW-AV51 - Setting up Bluetooth

51
Setting up Bluetooth
To display the <Bluetooth Setup> screen, ☞ page 49.
Menu items Selectable setting/item Initial: Underlined
Phone Connection
♦ Connect
♦ Disconnect
: ☞ page 50
: ☞ page 50
Phone Device Shows the phone device name.
Audio Connection
♦ Connect
♦ Disconnect
: ☞ page 50
: ☞ page 50
Audio Device Shows the audio device name.
PIN Code
Changes the PIN code of the unit. (☞ page 49)
• Touch the current PIN code, enter a new PIN code, then press [Save].
Device Name Shows the device name to be shown on the Bluetooth device—JVC Unit.
Device Address Shows the MAC address of the unit.
Auto Connect
♦ On
♦ Off
: The connection is automatically established with the last
connected Bluetooth device when the unit is turned on.
: Cancels.
HF/Audio Output Select the speakers used for Bluetooth (both phone and audio player).
♦ Front
♦ All
: From front speakers only.
: From all speakers.
Initialize Hold [Enter] to clear the registration of Bluetooth devices and memory of the preset list
and call lists.
To detach the Bluetooth adapter
“JV C”
• Store the Bluetooth adapter in the supplied bag.
• When inserting the Bluetooth adapter again,
attach it firmly with the JVC logo facing up.
EN_KW-AV61UI.indb 51EN_KW-AV61UI.indb 51 12/11/09 11:5212/11/09 11:52