ENGLISH
SETTINGS
41
Menu items Selectable settings, [reference page]
Disc Setup 2
*
3
Speaker Level
You can adjust the output level of the activated speakers (
☞
see “Speaker Size” on page 40), monitoring the test tone.
• Front Left/Center/Front Right/Rear Right/
Sub Woofer*
4
/Rear Left: adjust the output level of each
speaker in the range of –10dB to +10dB; Initial 00.
• Press and hold ENT to turn on and off the test tone—Test
Tone: ON, OFF.
Speaker Distance*
5
You can adjust the speaker output timing.
• Front Left/Center/Front Right/Rear Right/Rear Left:
adjust the speaker distance from the listening position in
the range of 15 cm/6 inches to 600 cm/240 inches in 15-
cm/6-inch step. [Initial: 120 cm (for center speaker), 150
cm (for the other speakers)]
• Press and hold DISP to change the measuring unit—cm and
inch.
Tuner
IF Band Width Auto: Increases the tuner selectivity to reduce interference
noises between adjacent stations. (Stereo effect may
be lost.)
Wide: Subject to the interference from adjacent stations,
but sound quality will not be degraded and the stereo
effect will remain.
TV Channel Area
*
6
Select the country where you use this unit with the TV tuner
unit—KV-C1001/KV-C1008.
• For KV-C1001: ITALY, INDONESIA, CCIR (for other
countries)
• For KV-C1008: AUSTRALIA, NEW ZEALAND,
INDONESIA, CCIR (for other countries)
*
4
This subwoofer level setting takes effect only when surround is activated (
☞ also page 43).
*
5
Not selectable when only the front speakers are activated.
*
6
Not displayed when KV-C1000 is connected.
Adjusts the speaker distance
Adjusts the speaker level
Selects the speaker
Selects the speaker
EN35-44_KW-AVX700UN_f.indd 41EN35-44_KW-AVX700UN_f.indd 41 06.2.21 9:56:21 AM06.2.21 9:56:21 AM