EasyManuals Logo

JVC KW-AVX706 User Manual

JVC KW-AVX706
436 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #368 background imageLoading...
Page #368 background image
ENGLISH
46
More about this unit
General
Turning on the power
By pressing SOURCE on the unit, you can
also turn on the power. If the source is ready,
playback starts.
Watching picture
If you change the aspect ratio to “Just,” both
sides of the picture are extended horizontally
to fit the picture to the monitor size. It may
cause the center portion of the picture to look
distorted.
FM/AM
Storing stations in memory
When SSM is over, received stations are
preset in No. 1 (lowest frequency) to No. 6
(highest frequency).
Disc
General
In this manual, words “track” and “file” are
interchangeably used.
This unit can also play back 8 cm discs.
This unit can only play back audio CD
(CD-DA) files if different type of files are
recorded in the same disc.
This unit can display only one-byte
characters. No other characters can be
correctly displayed.
Inserting a disc
When a disc is inserted upside down, “Disc
Error Please Eject” appears on the monitor.
Eject the disc.
Ejecting a disc
If the ejected disc is not removed within
15 seconds, the disc is automatically inserted
again into the loading slot to protect it from
dust. (Disc will not play this time.)
Speaker/signal indicators
The speaker indicators—squares around “L,”
“R,” “LS,” and “RS” lights in light blue, when
the corresponding speakers are set to “Large”
or “Small” ( page 40).
The center speaker indicator—square around
“C” lights in light blue, when the center
speaker is set to “Large” or “Small” and when
surround is activated.
Sounds come out of the speakers whose
speaker indicators are lit on the monitor.
The SW indicator lights up when “Sub
Woofer” is set to “On” ( page 40).
The signal indicators indicate the incoming
signals—L (front left) / R (front right) / C
(center) / LFE (low frequency effect) / LS (left
surround) / RS (right surround) / S (monaural
surround).
If the speaker is activated, but the signals
corresponding to the speaker are not coming
in, the signal indicators changes their color
from white to black to indicate no signals
coming in (therefore no sound comes through
the corresponding speakers).
Changing the source
If you change the source with Dual Zone
deactivated, playback also stops without
ejecting the disc.
Next time you select “DISC” for the playback
source, disc play starts from where it has been
stopped previously.
Speaker indicators
Signal indicators
EN45-48_KW-AVX700UN_f.indd 46EN45-48_KW-AVX700UN_f.indd 46 06.2.21 9:57:03 AM06.2.21 9:57:03 AM

Table of Contents

Other manuals for JVC KW-AVX706

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KW-AVX706 and is the answer not in the manual?

JVC KW-AVX706 Specifications

General IconGeneral
Display TypeLCD
DIN SizeDouble DIN
TouchscreenYes
Motorized ScreenYes
Remote ControlYes
Peak Power Output50 Watts x 4 Channels
Subwoofer Preamp OutputYes
Bluetooth CompatibilityYes
iPod CompatibilityYes
USB InputYes
SD Card SlotYes
AUX InputYes
DVD PlayerYes
CD PlayerYes
MP3 PlaybackYes
WMA PlaybackYes
JPEG PlaybackYes
Built-in AmplifierYes
Video OutputYes
Audio OutputYes
Compatible Audio FormatsMP3, WMA, AAC
Resolution800 x 480
Preamp Outputs3 pairs (Front, Rear, Subwoofer)
NavigationOptional
Satellite Radio ReadyYes
Compatible Video FormatsMPEG-1, MPEG-2
RMS Power Output22 watts x 4 channels
Equalizer13-Band

Related product manuals