32
ENGLISH
Using the Bluetooth cellular phone
2
Adjust the volume of the incoming calls.*
When a call comes in...
The source is changed to “Bluetooth PHONE”
automatically.
Name and phone number (if acquired)
When <Auto Answer> is activated...
The unit answers the incoming call automatically.
☞
page 34
When <Auto Answer> is deactivated...
(☞ page 59)
To answer the incoming call
• Press any button on the monitor panel (except
/ATT or +/–).
• Press the message displayed on the touch panel.
To end the call
• Hold any button on the monitor panel (except
/ATT or +/–).
• Hold the message displayed on the touch panel.
• You can adjust the microphone volume. (☞ page 59)
~ Press [SOURCE], then press [Blue(t☞ o opathge P 9H) ONE].
• You can also use SOURCE on the monitor panel. Press it repeatedly.
Ÿ
Press [AV MENU].
!
Press [Bluetooth].
/ Establish the connection with a device, then make a call (or settings using <Bluetooth>
Sound mode
menu).
pages 58 and 59
☞
(☞ page 48)
Status of the device
Signal strength/Battery
remainder
(only when the information
comes from the device)
[AV MENU] Hold: Activates <Voice Dialing> function
[5 ∞] Select the registered device
The Bluetooth icon
(“New Device” appears when a new device can be registered.)
lights up when
the adapter is
connected.
: Buttons on the touch panel. In the
explanation, they are indicated inside
[ ].
1
* When a cellular phone with audio function is connected,
appears.
2
* This adjustment does not affect the volume level of the other sources.
1
*
EN_KW-AVX710[EU].indb 32EN_KW-AVX710[EU].indb 32 07.12.17 5:46:24 PM07.12.17 5:46:24 PM
To Next Page
Loading...
