JVC KW-AVX716 - Page 34

34
ENGLISH
To stop ringing (canceling the outgoing call)
Hold any button on the monitor panel (except
/ATT
or +/–).
Entering a phone number
• You cannot use the remote controller to enter phone
numbers.
You can enter [0] – [9], [*], [#] (up to 32 numbers)
• [ BS]: Erases the character before the cursor.
• [ Del]: Erases the character on the cursor.
• [ Preset]: Goes to Preset List. You can preset the
entered number by selecting a preset
number. (☞ page 35)
• [ Dial]: Calls the entered number.
• You can easily access <Dial Menu> by pressing
[SHORT CUT] on the touch panel, then...
You can also access <Dial Menu> by holding
SOURCE on the monitor panel.
• You can easily activate <Voice Dialing> by
pressing [ SHORT CUT] on the touch panel, then...
You can also activate <Voice Dialing> by
holding [AV MENU].
To redial previously dialed numbers
1
2
3
When using the remote controller, you can
display <Redial> menu anytime .
[Hold]
EN_KW-AVX710[EU].indb 34EN_KW-AVX710[EU].indb 34 07.12.17 5:46:25 PM07.12.17 5:46:25 PM