JVC KW-AVX716 - Page 36

36
ENGLISH
Bluetooth Information:
If you wish to receive more information about Bluetooth, visit the following JVC web site: <http://www.
jvc-victor.co.jp/english/car/>
You can use the following buttons on the remote
Using the Bluetooth audio player
controller for the Bluetooth audio operations.
☞ page 48
Sound mode
(☞ page 48)
[3 / 8] [7] Start and pause playback
[4 ¢
] Reverse/forward skip
[5 ∞] Select the registered device
(“New Device” appears when a new device can
3
be registere)d.*
Status of the device
Signal strength/Battery
remainder
(only when the information
comes from the device)
The Bluetooth icon
lights up when
the adapter is
connected.
~
Press [SOURCE], then press [Bluetooth
AUDIO(☞ ]. page 9)
• You can also use SOURCE on the monitor
panel. Press it repeatedly.
Ÿ
Start playback.
: Buttons on the touch panel. In the
explanation, they are indicated
inside [ ].
1
*
2
*
1
* When a cellular phone with audio function is connected,
appears.
2
* Indicates the button pressed. It may be different from the operation status.
3
* You cannot select “New Device” when a Bluetooth audio player is connected.
Start and pause playback.
Reverse/forward skip
Adjust the volume.
:
:
:
EN_KW-AVX710[EU].indb 36EN_KW-AVX710[EU].indb 36 07.12.17 5:46:26 PM07.12.17 5:46:26 PM