JVC KW-AVX716 - Page 46

46
ENGLISH
To display the operation buttons (☞ page 20) while viewing the navigation screen
• The operation buttons displayed on the screen vary among the playback sources.
• If no operations are done for about five seconds, the operation buttons disappear.
• The above buttons except [KEY] also work when they are not shown on the screen (while viewing the navigation
Navigation screen
You can also connect a Navigation System to the VIDEO IN terminal so that you can watch the navigation screen.
screen).
Preparation:
Make sure <Navigation> is selected for <AV Input>. (☞ page 55)
To view the navigation screen (and listen to the navigation guidance*)
Press DISP on the monitor panel
(
☞re
p
p
e
a
a
g
t
e
e
9
d
)
ly.
• The aspect ratio of the navigation screen is fixed to
<Full> regardless of the <Aspect> setting. (☞ page
52)
* If your Navigation System is equipped with the voice guidance function.
When <Navigation> is selected for <AV Input> (☞ page 55)
• You can use the source “AV-IN” for listening to an audio source connected to the LINE IN terminals.
• Some status messages such as volume level will not appear on the screen.
Touch the screen (center portion). Touch the screen (center portion).
EN_KW-AVX710[EU].indb 46EN_KW-AVX710[EU].indb 46 07.12.17 5:46:31 PM07.12.17 5:46:31 PM