JVC KW-NSX1 - Connecting External Components; Using Front AUX Input

34
ENGLISH
AV-IN name* ( ☞ below)
*
Source type (“AV-IN” or
“Front AUX”)
1 Connect an external component.
3.5 mm stereo mini plug
(not supplied)
2 Select “ FrontAUX ” as the source.
(☞ page 12)
3 Turn on the connected component and
start playing the source.
Using other external components
• When the operation buttons are not displayed on the screen, touch the area shown on
the illustration.
• To change settings for video playback, ☞ page 42.
[Mode]* Changes the AV-IN name.
• Press [2] or [3] to select an AV-IN name.
[AV MENU] Displays <AV Menu> screen.
* Appears when “
AV-IN ” is selected as the source.
You can connect an external component to the LINE IN/
VIDEO IN jacks. (☞ Installation/Connection Manual)
Preparation:
Select <AV-IN> for <AV Input> setting. (☞ page 46)
• <AV Input> setting can be changed only when
<Input> setting in <Navigation Input> is set to
<Smartphone> or <Off>.
1 Select “ AV-IN ” as the source. (☞ page 12)
2 Turn on the connected component and
start playing the source.
AV-IN Front AUX
EN_KW-NSX1[J].indb 34EN_KW-NSX1[J].indb 34 12/04/23 16:2312/04/23 16:23