JVC KW-NSX1 - Bluetooth Device Settings

59
ENGLISH
Mobile phone
Menu items Selectable setting/item Initial: Underlined
Connection
♦ Connect
♦ Disconnect
: ☞ page 52
: ☞ page 52
PIN Code Changes the PIN code of the unit.
• Touch the current PIN code, enter a new PIN code, then press [Save].
Device Name Shows the device name to be shown on the Bluetooth device—JVC Unit.
Device Address Shows the MAC address of the unit.
Phone Device*
1
Shows the phone device name.
Audio Device*
2
Shows the audio device name.
Auto connect
♦ On
♦ Off
: The connection is automatically established with the last connected
Bluetooth device when the unit is turned on.
: Cancels.
HF/Audio Output Select the speakers used for Bluetooth (both phone use and audio player).
♦ Front
♦ All
: From front speakers only.
: From all speakers.
Initialize Hold [Enter] to clear the registration of Bluetooth devices and memory of the preset list and
call lists.
Auto Answer*
1
♦ On
♦ Off
: The unit answers the incoming calls automatically.
: The unit does not answer the calls automatically. Answer the calls
manually.
SMS Notify*
1
♦ On
♦ Off
: The unit informs you of the arrival of a message by ringing and
displaying “Receiving Message.”
: The unit does not inform you of the arrival of a message.
Ring Mode*
1
♦ System
♦ Phone
: Selects the ring tone set on the unit.
: Selects the ring tone set on the mobile phone. (This function may not
work depending on the mobile phone.)
Ring Tone
Change*
1
When <Ring Mode> is set to <System>, press [Enter], then select the ring tone for
received calls and SMS from <Tone1>, <Tone2>, <Tone3>.
♦ Call Tone
♦ Message Tone
: Selects the ring tone for phone calls.
: Selects the ring tone for SMS.
*
1
Appears only for the phone setting screen.
*
2
Appears only for <Mode> screen while “ BT Audio ” is selected as the source.
Bluetooth audio player
On “
BT Audio ” source control screen:
Bluetooth device settings
EN_KW-NSX1[J].indb 59EN_KW-NSX1[J].indb 59 12/04/23 16:2312/04/23 16:23